Rsop Security Has Requested to Process Its Policy Settings Again

The GPResult.exe command-line tool is used to go a Resultant Gear up of Policy (RSoP) that is applied to a user and/or computer in an Active Directory domain. GPResult allows you to display a listing of domain policies (GPOs) that are applied to the figurer and user, policy settings, GPO processing time and errors. It is the most unremarkably used administrator tool for analyzing settings and troubleshooting Group Policy issues in Windows.

In this article, nosotros'll take a look at how to use the GPResult command to diagnose, debug, and clarify Group Policy settings applied to Windows in an Active Directory domain.

Contents:

• How to Use the Group Policy Results (GPResult.exe) Command?
• Exporting RSoP Report to HTML with GPResult
• GPResult: Getting RSOP Data from a Remote Figurer
• GPResult: The User Does Not Accept RSoP Data
• The post-obit GPOs Were Not Applied Because They Were Filtered Out
• Resultant Set of Policies (RSOP.msc) Snap-in in Windows

How to Apply the Grouping Policy Results (GPResult.exe) Command?

Y'all must run the GPResult control on the computer on which you want to check the application of Grouping Policy. The syntax for GPResult is:

GPRESULT [/S system [/U username [/P [password]]]] [/SCOPE telescopic] [/USER targetusername] [/R | /V | /Z] [(/10 | /H) <filename> [/F]]

To get detailed information about the Group Policies practical to a specific user or computer, also every bit other settings related to the GPO infrastructure (the resulting GPO policy settings, RsoP), open up the command prompt and run this command:
Gpresult /r
The results of this command are divided into two sections:

• Computer SETTINGS – the section contains the information on the GP objects applied to the computer (as an Active Directory object);
• USER SETTINGS – this is a user policy section (the policies applied to the account of the AD user).

Allow's briefly cover the basic settings/sections in the GPResult output that can be of interest for administrators:

• Site Proper name – is the proper name of the Advert site where the computer is located;
• CN – full approved user/calculator proper name for which RSoP data was generated;
• Last time Group Policy was applied – is the time when the Group Policy settings were final practical (updated);
• Group Policy was applied from – is the domain controller name from which last GPO versions has been downloaded;
• Domain Name and Domain Type – is the name and the version number of the Active Directory domain schema;
• Applied Group Policy Objects – are the lists of applied GPOs;
• The following GPOs were not practical because they were filtered out
• The user is a part of the following security groups – a listing of domain security groups the user is a member of.

In this example, you can see that 4 Grouping Policies are applied to the user object.

• Disable Buried Credentials;
• DNS Suffix Search List;
• Enable Windows Firewall;
• Default Domain Policy.

The report will too contain information about local policy settings configured through the Local Grouping Policy Editor (gpedit.msc).

You can use the /telescopic option to display just user or reckoner policies:
gpresult /r /scope:user
or simply practical computer policies:
gpresult /r /scope:calculator

If yous try to get a list of GPOs practical to a computer object under non-admin user account, the gpresult command will render an access denied mistake:
gpresult /r /scope:computer

Mistake: Admission Denied.

For the convenience of parsing and analyzing RSOP data, you can redirect the Gpresult results to the clipboard:
Gpresult /r |prune
or a text file:
Gpresult /r > c:\ps\gpresult.txt
To display more detailed RSoP information, you need to add together the /z key:
Gpresult /r /z
For example, the screenshot shows the domain password policy settings that are applied to the reckoner.

Exporting RSoP Report to HTML with GPResult

GPResult allows you to generate an HTML report on the applied resultant policies (available in Windows 7 and newer). This report contains detailed data on all system settings that are set by the Grouping Policies and the names of the GPOs that have set them. The gpresult HTML study is structurally like to the Settings tab in the Group Policy Direction Console (gpmc.msc). You lot tin can generate the RSoP HTML report using the post-obit gpresult command:
GPResult /h c:\PS\gpo-study.html /f

If you don't specify the total path to the HTML file, then the gpresult HTML written report will be saved to the %WINDIR%\system32 folder.

To generate the study and automatically open information technology in a browser, run the post-obit command:
GPResult /h GPResult.html & GPResult.html
The gpresult HTML study contains quite a lot of useful data: you lot can meet GPOs applying errors, processing time (in ms) for a specific policy and CSEs (in the Calculator Details -> Component Status section). This is useful when you need to understand why GPO processing takes a long time.

For instance, in the screenshot higher up you lot tin can run across that the E nforce password history policy with the settings "24 passwords remembered" is applied by the Default Domain Policy (Winning GPO column).

An HTML report allows you to present the resulting set of figurer GPOs in a convenient graphical grade.

GPResult: Getting RSOP Information from a Remote Computer

GPResult can get a resultant prepare of policies from a remote computer as well with no demand to log locally or via the RDP on to the remote device.
GPResult /south remote-pc-name1 /r
Yous can specify a username and password to connect to a remote calculator using the gpresult options:

gpresult /R /Southward wks2b21c /scope user /U corp\jsmith /P myPaSSw0rd1!

If you don't want your countersign to be saved in the PowerShell command history, yous can prompt for the countersign interactively:

gpresult /R /Southward wks2b21c /scope user /U corp\jsmith /P

Similarly, you can remotely collect data on both user and reckoner policies.

If you don't know the name of a user who is logged on to a remote reckoner, you tin can get a username like this:

qwinsta /SERVER:wks2b21c

An RSOP HTML written report like to the one generated past the gpresult command can be generated using PowerShell. To get the resultant policies report from a remote estimator, utilise the Get-GPResultantSetOfPolicy cmdlet from the GroupPolicy module:

Go-GPResultantSetOfPolicy -user jsmith -computer corp\wks2b21c -reporttype html -path c:\ps\gpo_rsop_report.html

GPResult: The User Does Not Take RSoP Information

When the UAC is enabled and GPResult is used in not-elevated way, only the user settings department of the Group Policies is shown. If you need both sections (USER SETTINGS and COMPUTER SETTINGS) to be displayed, the command must be running in the command prompt with the administrator privileges.

If an elevated command prompt is run on behalf of an account that is different from the electric current user, the tool will show the warning: INFO: The user "domain\user" does not have RSOP data. This happens since GPResult tries to collect the data of the user that has started it, but because this user has not logged in, there is no RSOP information for him. To collect RSOP data for a user with an active session, you need to specify his business relationship:
gpresult /r /user:corp\edward

Also, check the fourth dimension (and timezone) on the client. The time must match the time on the domain controller running the FSMO PDC role (Master Domain Controller).

The following GPOs Were Not Applied Because They Were Filtered Out

When troubleshooting the applied Grouping Policies, it'due south worth paying attending to the department: The post-obit GPOs were not applied because they were filtered out. Information technology contains the listing of the GPOs that are not applied to this object for any reason. Here are some reasons why the GPOsare non practical to a specific Active Directory object:

• Filtering: Not Applied (Empty) – the policy is empty (there is zilch to apply);
• Filtering: Denied (Unknown Reason) – a user/computer is probable to accept no permission to read/apply this policy. The permissions tin be configured in the Security tab of the Group Policy Management Console (gpmc.msc);
• Filtering: Denied (Security) — an explicit denial is specified in the department Apply Group Policy, or an AD object is not in the list of groups in the Security Filtering section of the GPO.

You tin can also see if a GPO should be applied to an organizational unit (OU) in AD or to a specific object on the effective permissions tab (Advanced -> Effective Admission) in the GPMC.

Resultant Set of Policies (RSOP.msc) Snap-in in Windows

Initially, the graphical console RSOP.msc was used to diagnose applied Group Policies in Windows. This mmc snap-in allows you to go the settings of the resulting policies (domain + local) applied to the computer and the user in a graphical grade that is similar to the GPO editor panel. The RSOP.msc panel on the screenshot below shows that the Windows update settings are configured by the WSUS_SERVERS policy.

You cannot use the RSOP.msc to fully analyze the applied GPOs in modernistic Windows versions. It doesn't show settings applied through Client Side Extensions (CSE), such equally GPP (Group Policy Preferences), doesn't allow searches, and provides piffling diagnostic information. When running rsop.msc on Windows 10 and 11, there was a alarm that y'all should apply gpresult to get a full GPO written report.

Starting with Vista, the Resultant Set of Policies (RSoP) report does non testify all Microsoft Group Policy settings. To run into the full set of Microsoft Group Policy settings applied for a calculator or user, use the control-line tool gpresult.

In this commodity, nosotros looked at how to apply the GPResult command to clarify the resultant Group Policies that are applied in Windows. In addition, the following guide may exist helpful for troubleshooting GPOs in a domain: "Common issues that prevent Group Policy from being applied to clients".

songfortallen.blogspot.com

Source: http://woshub.com/diagnose-group-policies-issues-with-gpresult/